Our prices and times are based on you providing error-free, print-ready files. Correcting file errors may cost extra money and time. Take a few minutes to check your files using our handy online printing services checklist! Download the white papers throughout to learn about how to correct the problem itself.
There are three main elements to know when setting up a document with a bleed. They are the bleed line, trim line, and safety line. If you plan on creating more printing projects in the future, bleed should be at the top of your online printing checklist.
Bleed = 1/8” (.125)
One important custom printing term to know is a bleed. Bleed refers to an extra 1/8" (.125) of image that extends beyond the trim area of your printing piece. The project is printed on an oversized sheet that is cut down to size with the appearance that the image bleeds off the edge of the paper.
Trim line indicates where to trim the printed sheet or where the edge of the paper is to ensure that the edges of the printed document are printed correctly. Similar to register or crop marks. The trim line is the final document size.
The safety line or inner margin is the area in which to keep all important elements (text, logo, and/or content) within to prevent them from trimming off. All important elements should be at least 1/8" (.125) inside the edge of the trim line. The cutting of your printed piece is done in large stacks and may vary from the top and the bottom of the stack.
We prefer that any booklet files be sent as single pages, not spreads. In your files, page 1 should be the front cover and the last page should be the back cover (see below).
Example for an 8 Page Document:
The preferred file format is a PDF file but we will accept native files from these applications:
We prefer PDF files but also accept .TIFF, .JPEG, .INDD, .PSD, .AI and .EPS file types. If you're working in a program not mentioned above, files must be exported as a PDF.
File and/or image resolution should be set at 300 dpi to ensure that the final document is not pixelated (fuzzy) when printed.
Enlarging an image will lower the resolution while reducing an image will increase the resolution. Enlarging an image in a layout is NOT recommended. Images that are less than 300 dpi could reproduce poorly looking fuzzy or pixelated.
Images from the internet are not recommended, as most images are only 72 dpi.
An unfavorable image cannot be resaved as a different type of file. For example, you cannot place a gif file in Photoshop and resave it as an EPS file. This does not change the compatibility of the file. If you have to use low-resolution images we will print only after you consent to the quality.
We recommend that all transparencies be flattened before file submission. We also ask that you set your fonts to outlines prior to file submission. Not flattening or outlining fonts can cause some items to fall off during file preparation for printing. Any files submitted without these things being done may result in items dropping out from your artwork during the conversion process needed to prepare your artwork for printing.
Our prices and time frames are based on ordering online and providing error-free, print-ready files. File errors or extensive design edits may incure additional charges and/or delivery dates cannot be guaranteed. Ensure your files are correct before submitting them by following the requirements listed in the pdf file checklist above!
Download Our White Papers for More Information: